Back to products
HPE DL180 Gen10
Rp147.500.000
HUAWEI WLAN AP Hardware 02353GES-001 AirEngine5760-51
Rp10.065.683
Deskripsi
PART LIST
| 1 | WLAN AP Hardware | |
| 02353GES-001 | AirEngine5760-51 | |
| 2 | Technical Support Service | |
| 88134UGJ-55M | 02353GES-001_88134UGJ- 55M_12 |
SPECIFICATION
| Installation Type | Wall,Ceiling,T-Rail | ||
| Diameter [mm] | 220 mm | ||
| Height [mm] | 51 mm | ||
| Weight without packaging [kg(lb)] | 1.15 kg (2.53 lb) | ||
| Maximum number of physical ports on the entire device | 5GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE auto-sensing | ||
| GE (RJ45) x 1, 10M/100M/1000M auto-sensing | |||
| Maximum power consumption [W] | 28.8 (excluding USB and IoT cards) | ||
| Maximum heat dissipation [BTU/hour] | 98.3 (without USB or IoT card) | ||
| Power supply mode | DC adapter,PoE | ||
| Input voltage range [V] | DC: 43.2 V to 57.6 V | ||
| PoE: 802.3bt/at | |||
| Rated input voltage [V] | 48 V | ||
| DC power supply description | If an RTU license is loaded, no function is restricted. | ||
| If no RTU license is loaded, Wi-Fi supports only the following mode and other functions are not restricted: | |||
| – Dual-radio mode: 2.4 GHz (2×2) + 5 GHz (4×4) | |||
| – Triple-radio mode: 2.4 GHz (2×2) + 5 GHz (2×2, high band) + 5 GHz (2×2, low band) | |||
| 802.3at power supply description | With an RTU license loaded: | ||
| Wi-Fi: | |||
| If the USB and IoT card slots are not used, the radio transmit power is not affected. | |||
| – Dual-radio mode: 2.4 GHz (4×4) + 5 GHz (4×4) | |||
| – Triple-radio mode: 2.4 GHz (2×2) + 5 GHz (2×2, high band) + 5 GHz (4×4, low band) | |||
| – Dual-radio + independent radio scanning mode: 2.4 GHz (2×2) + 5 GHz (4×4) + 5 GHz independent radio scanning | |||
| If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. | |||
| Wired network port: | |||
| The speed of the 5GE electrical port is reduced to 2.5GE or lower. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.) | |||
| Other ports: | |||
| Either the 5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in dual-radio mode and the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. | |||
| Without an RTU license loaded: | |||
| Wi-Fi: | |||
| If no USB or IoT card slot is used, the radio transmit power is not affected. | |||
| – Dual-radio mode: 2.4 GHz (2×2) + 5 GHz (4×4) | |||
| – Triple-radio mode: 2.4 GHz (2×2) + 5 GHz (2×2, high band) + 5 GHz (2×2, low band) | |||
| If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. | |||
| Wired network port: | |||
| The speed of the 5GE electrical port is reduced to 2.5GE or lower. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.) | |||
| Other ports: | |||
| Either the 5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in dual-radio mode and the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager. | |||
| 802.3bt power supply description | For 802.3bt class 6/class 8 power supply: | ||
| If an RTU license is loaded, no function is restricted. | |||
| If no RTU license is loaded, Wi-Fi supports only the following mode and other functions are not restricted: | |||
| – Dual-radio mode: 2.4 GHz (2×2) + 5 GHz (4×4) | |||
| – Triple-radio mode: 2.4 GHz (2×2) + 5 GHz (2×2, high band) + 5 GHz (2×2, low band) | |||
| Maximum transmit power [dBm] | 2.4G: 26 dBm (Max) | ||
| 5G: 26 dBm (Max) | |||
| (Note: This is the total MIMO radio power, the same as: | |||
| 2.4G: 20 dBm/chain | |||
| 5G: 20 dBm/chain) | |||
| Bluetooth: < 10 dBm | |||
| Antenna gain [dBi] | 2.4G: 4.5 dBi | ||
| 5G: 5.5 dBi | |||
| Bluetooth: 4 dBi | |||
| Radio interface | Built-in smart antennas | ||
| Wi-Fi standard | 2.4G: 802.11b/g/n/ax | ||
| 5G: 802.11a/n/ac/ac Wave 2/ax | |||
| MIMO spatial streams | Triple-radio mode: | ||
| – Radio 0 (2.4 GHz): 2×2 | |||
| – Radio 1 (5 GHz): 2×2 (high frequency band) | |||
| – Radio 2 (5 GHz): 4×4 (low frequency band) | |||
| Dual-radio mode: | |||
| – Radio 0 (2.4 GHz): 4×4 | |||
| – Radio 1 (5 GHz): 4×4 | |||
| Operating frequency band | 2.4GHz,5GHz | ||
| Radio number | 02-Mar | ||
| Memory | DDR4: 2 GB | ||
| Storage | NAND Flash 512 MB; NOR Flash 16 MB | ||
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) | ||
| Long-term operating temperature [°C(°F)] | –10°C to +50°C (14°F to 122°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) | ||
| Long-term operating relative humidity [RH] | 5% RH to 95% RH | ||
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) | ||
| MTBF [year] | 69.7 | ||
| MTTR [hour] | 0.5 | ||
| USB | USB 2.0 | ||
| Console port | BLE console | ||
| Atmospheric pressure [kPa] | 53kPa – 106kPa ETSI 300 019-2-3 | ||
| Service port surge protection [kV] | PoE port: | ||
| Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B | |||
| Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B | |||
| Ground | Ground | ||
| IoT slot | IoT card | ||
| BLE | BLE5.0 | ||
| 3G/LTE filte (ACC) | Supported | ||
